And Now, For A Little Color!

I just completed my site inspection at the beach which centered on paint and stain colors.

One of the most interesting things that has occurred with my work in Florida is the extreme effect the light has on hue.

Their light is much brighter and seems to have a bluer tint than ours therefore colors selected in my light,whether natural or artificial, do not translate when they hit the walls down there. This is the second time I have encountered it and am curious to know how other designers have handled it.

The colors originally selected were Benjamin Moore Seattle Mist (center) and Northern Cliffs (right) the chip on left is Puritan Gray and it was the accent color for the kitchen island.

This is what the chips look like.

 

 

On all jobs I have the painters test the colors before they begin so that we can see what happens in the client’s light.

Often if a room is filled with windows overlooking  foliage the paint will take on a green cast.

In areas that don’t get a lot of sunlight the paint may look gray so site testing is very important.

When I arrived this is the first thing that I saw. This was supposed to be the wall color but in this light and in the shadows cast by the staircase it looked olive green. Not good.

I suspected this was going to happen so I came armed with several other neutrals all in poster board size samples.

Hopefully you can see the different undertones represented by these boards.

It was absolutely crazy what happened when we pulled them out.  A color that looked like a soft, pastel blue lying on the work table went wedgewood as I started to lift it at a 45 degree angle and by the time it was vertical we had a dark blue-gray.

No one present could believe it. Scary.

The paint chemist in me came out and I began to experiment with 1/2 formula, 3/4 formula, etc. but none of it worked.

You can see what I’m talking about in this photo. Every wall is the exact same color but if you look at the stair wall on the second floor compared to the first the second looks blue ( it has a window with natural light coming in).

The wall to the right in what will be the kitchen looks orangey- yellow- it is picking up on the color of the raw pine which thankfully will be stained to reflect the proper hue.

Color selection is not for the faint of heart.

Boyd was as bum-fuzzled as I.

LOL  (My Daddy always says that. Is it a word?)

In the midst of all that, we had to take a break from paint to solve a tile problem.

A vanity shown as 5’11” on the plan had been field changed to over 10′ and we weren’t sure that there was enough tile to complete the backsplash.

Here we are counting every tiny piece of 2×2 tile we could find.

 Fortunately, we had enough- by about 6 tiles. Whew!

In the end…. I used the original trim color as the wall color. (shown on the bottom of the right board)

I chose another white altogether for the trim. ( shown on top of the right board)

The original wall color went from flat to semi-gloss and became the cabinet color. (shown on top of left board)

And I chose a blue, tinted almost 50% lighter than the original selection to use on the kitchen island. ( bottom left)

What do you think?

By the way do you know the difference between tint and shade?

You start with a hue (what we know as color i.e. red) Imagine that it is in the middle of a long horizontal line.

If you begin to add white, one drop at a time, moving to the left of hue you get pink ( a tint of red).

If you begin to add black, one drop at a time, moving to the right of hue you get maroon ( a shade of red).

Now, go impress your children.

What color stories do you have to tell? I would love to hear your experience with color selection.

And if you would like to say, “That was fun!” at the end of your project contact me at

www.cindybarganier.com.